• LuxCraft Balcony Tete-a-Tete Table in Weatherwood and Chestnut Brown — recycled poly outdoor chair for outdoor patio seating
  • LuxCraft Balcony Tete-a-Tete Table in Black — Amish-crafted recycled poly, weather-resistant design
  • LuxCraft Balcony Tete-a-Tete Table in White — Amish-crafted recycled poly, commercial-grade poly
  • LuxCraft Balcony Tete-a-Tete Table in Weatherwood — Amish-crafted recycled poly, weather-resistant design
  • LuxCraft Balcony Tete-a-Tete Table in Weatherwood and Black — wide-armrest patio chair, fade-resistant poly
  • LuxCraft Balcony Tete-a-Tete Table in Chestnut Brown — recycled poly outdoor chair for outdoor patio seating
  • LuxCraft Balcony Tete-a-Tete Table in Cherrywood and Black — recycled poly outdoor chair for outdoor patio seating
  • LuxCraft Balcony Tete-a-Tete Table in Dove Gray and Black — Amish-crafted recycled poly, commercial-grade poly
  • LuxCraft Balcony Tete-a-Tete Table in Dove Gray and Slate — wide-armrest patio chair, long-life recycled poly
  • LuxCraft Balcony Tete-a-Tete Table in Cedar and Black — wide-armrest patio chair, fade-resistant poly
  • LuxCraft Balcony Tete-a-Tete Table in Red and Black — recycled poly outdoor chair for outdoor patio seating
  • LuxCraft Balcony Tete-a-Tete Table in Red and White — Amish-crafted recycled poly, 20-year poly durability
  • LuxCraft Balcony Tete-a-Tete Table in Tangerine and Black — wide-armrest patio chair, recycled HDPE construction
  • LuxCraft Balcony Tete-a-Tete Table in Tangerine and White — recycled poly outdoor chair for outdoor patio seating
  • LuxCraft Balcony Tete-a-Tete Table in Yellow and Black — wide-armrest patio chair, long-life recycled poly
  • LuxCraft Balcony Tete-a-Tete Table in Yellow and White — recycled poly outdoor chair for outdoor patio seating
  • LuxCraft Balcony Tete-a-Tete Table in Lime Green and Black — Amish-crafted recycled poly, weather-resistant design
  • LuxCraft Balcony Tete-a-Tete Table in Lime Green and White — wide-armrest patio chair, fade-resistant poly
  • LuxCraft Balcony Tete-a-Tete Table in Blue and Black — Amish-crafted recycled poly, commercial-grade poly
  • LuxCraft Balcony Tete-a-Tete Table in Blue and White — wide-armrest patio chair, long-life recycled poly
  • LuxCraft Balcony Tete-a-Tete Table in Aruba Blue and Black — recycled poly outdoor chair for outdoor patio seating
  • LuxCraft Balcony Tete-a-Tete Table in Aruba Blue and White — Amish-crafted recycled poly, 20-year poly durability
  • LuxCraft Balcony Tete-a-Tete Table in Antique Mahogany — wide-armrest patio chair, recycled HDPE construction
  • LuxCraft Balcony Tete-a-Tete Table in Antique Mahogany and Black — recycled poly outdoor chair for outdoor patio seating
  • LuxCraft Balcony Tete-a-Tete Table in Birch and White — recycled poly outdoor chair for outdoor patio seating
  • LuxCraft Balcony Tete-a-Tete Table in Coastal Gray — Amish-crafted recycled poly, 20-year poly durability
  • LuxCraft Balcony Tete-a-Tete Table in Coastal Gray and Black — wide-armrest patio chair, recycled HDPE construction
  • LuxCraft Balcony Tete-a-Tete Table in Brazilian Walnut and Black — Amish-crafted recycled poly, weather-resistant design
  • LuxCraft Balcony Tete-a-Tete Table in Green — recycled poly outdoor chair for outdoor patio seating
1 29

LuxCraft Balcony Tete-a-Tete Table

LuxCraft Balcony Tete-a-Tete Table

by LuxCraft

SKU: BTTWWCBR

Price: $280.00
List Price: $356.20
Price: $280.00
You Save: $76.20 (21%)
  • LuxCraft Authorized Dealer
  • FREE Shipping in contiguous U.S.
  • Have a question? Call: 941-216-5633
Color
Additional 5% OFF Select Products + FREE Shipping | Coupon Code: GOTIME5 | Sale Ends:
View Cart
24 Jul
Ordered
25 Jul - 29 Jul
Order Ready
30 Jul - 03 Aug
Delivered

Shipping: Please note all authorized dealers have the same lead time as us.

Warranty

Warnings

Key Specs

  • Overall Dimensions: 20.125"W x 16.5"D x 4.625"H (connector tray only)
  • Weight: 11 lbs (connector tray only)
  • Configuration: Bolt-on connector that joins two Adirondack Balcony Chairs
  • Mounting Hardware: 8x 1.75" stainless screws (chair legs) + 4x 1.5" stainless screws (armrests)
  • Center Hole: Sized for standard market umbrella shaft
  • Required Chairs: 2x LuxCraft Adirondack Balcony Chair (counter-height variant)
  • Available Sets: Standalone connector or 3-piece set with 2 Adirondack Balcony Chairs
  • Material: Recycled HDPE poly with 316 stainless steel hardware
  • Made In: Sugarcreek, Ohio (Amish craftsmen)
  • Warranty: Lifetime residential / 5-year commercial
  • Woodgrain Pricing: Woodgrain finishes are priced higher than solid colors.

Key Features

  • Permanently Bolts to Two Chairs: 12 stainless screws lock the connector to both Adirondack Balcony Chairs
  • Structural Linkage: Connector becomes part of the assembled unit, not a separate piece
  • Shared Armrest-Height Surface: Drink and item placement within easy reach of both seats
  • Center Umbrella Hole: Accepts standard market umbrella shaft for shared shade
  • Fits Only Adirondack Balcony Chairs: Pre-drilled hole pattern matches that specific chair model
  • Coordinated 3-Piece Set Available: Ships with 2 Adirondack Balcony Chairs as a complete bundle

Connector tray for paired balcony chairs with stainless hardware

The LuxCraft Balcony Tete-a-Tete is not a freestanding table — it is an 11-pound poly connector tray that bolts permanently between two LuxCraft Adirondack Balcony Chairs to convert them into a single tete-a-tete seating unit. Mounting hardware threads into pre-drilled holes on the chairs' inside legs and armrests (four 1.75-inch screws per chair into the legs, plus two 1.5-inch screws per chair into the armrests), structurally locking the connector to both chairs. Once installed, the three pieces become one integrated piece of outdoor furniture.

The connector's flat top sits between the two chairs at armrest height, creating a shared surface for drinks, books, phones, and conversation items positioned within easy reach of both seated occupants. A center umbrella hole accepts a standard market umbrella shaft to shade both seats from a single pole. The bolt-on installation is the design choice that distinguishes this configuration from a separate side table positioned between two chairs — the chairs stay at the exact tete-a-tete spacing forever, with no sliding apart and no realignment needed across decades of use.

LuxCraft Balcony Tete-a-Tete Table in Weatherwood and Chestnut Brown — recycled poly outdoor chair for outdoor patio seating

What Tete-a-Tete Actually Means

Tete-a-tete is French for "head to head" — the term describes a paired seating arrangement where two occupants sit close together with a shared central surface between them. The LuxCraft Balcony Tete-a-Tete is the specific piece of hardware that creates this geometry: a connector tray bolted between two counter-height Adirondack Balcony Chairs, transforming what would otherwise be two standalone chairs into a single coordinated piece of outdoor furniture. The chairs face the same direction (typically outward toward a view) but share the connector at their inside armrests, creating an intimate paired-seating arrangement for couples, close friends, and conversation-focused outdoor moments.

LuxCraft Balcony Tete-a-Tete Table in Weatherwood — Amish-crafted recycled poly, weather-resistant design

Bolt-On Installation Engineering

The connector is engineered as a structural component, not a removable accessory. Installation involves 12 screws total — four 1.75-inch screws per chair attaching the connector to the inside chair legs, plus two 1.5-inch screws per chair attaching the connector to the inside armrests. The pre-drilled hole pattern on the chairs and the connector are designed to align precisely. Once tightened, the assembled unit behaves as a single piece: the chairs cannot slide apart, the connector cannot lift away, and the entire structure resists racking forces from guests pushing off the armrests to stand. Disassembly is possible but uncommon — most installations stay permanently configured for the life of the furniture.

LuxCraft Balcony Tete-a-Tete Table in Weatherwood and Black — wide-armrest patio chair, fade-resistant poly

Couples and Conversation Use

The tete-a-tete configuration suits a specific outdoor entertaining mode: paired seating designed around two-person interaction rather than larger group gatherings. Couples watching sunsets, close friends sharing morning coffee, mentor-mentee conversations, and outdoor business meetings all benefit from the format. The center connector provides the shared-surface convenience of a small café table while the bolt-on installation keeps the chairs at exactly the right spacing for natural conversation — close enough to talk easily, far enough apart to avoid feeling crowded. Add a market umbrella through the center hole for shared shade.

LuxCraft Balcony Tete-a-Tete Table in Aruba Blue and Black — recycled poly outdoor chair for outdoor patio seating

Permanent Installation Craftsmanship

Every LuxCraft Balcony Tete-a-Tete is hand-built by Amish craftsmen in Sugarcreek, Ohio. The connector is backed by a lifetime residential warranty and 5-year commercial warranty. Bolt-on structural connectors face different engineering demands than standalone tables — the connector must maintain precise hole alignment with the chair hardware across years of weather exposure, and the joints must hold rigidly under the lever forces of guests using the armrests to push themselves up out of the seats. The LuxCraft heritage construction methods deliver this specialty configuration with the same generational durability that defines every LuxCraft outdoor piece.

LuxCraft Balcony Tete-a-Tete Table in Aruba Blue and White — Amish-crafted recycled poly, 20-year poly durability

LuxCraft Balcony Tete-a-Tete Table Downloads

Frequently Asked Questions

  • No. The LuxCraft Balcony Tete-a-Tete is a connector tray, not a freestanding table. It has no legs of its own — it bolts permanently between two LuxCraft Adirondack Balcony Chairs (12 stainless screws total, into pre-drilled holes on the chairs' inside legs and armrests). The connector becomes part of the assembled chair unit and cannot stand alone. For a complete configuration, purchase the Tete-a-Tete 3-Piece Set which ships the connector + 2 Adirondack Balcony Chairs together.

  • Installation requires the Tete-a-Tete connector plus two LuxCraft Adirondack Balcony Chairs. Position the chairs facing the same direction with their inside legs aligned, then attach the connector using four 1.75-inch stainless screws per chair into pre-drilled holes on the inside legs, plus two 1.5-inch stainless screws per chair into pre-drilled holes on the armrests. A #2 square drive bit (not included) is the only tool required. Assembly typically takes 15-30 minutes.

  • The LuxCraft Balcony Tete-a-Tete connector measures 20.125 inches wide x 16.5 inches deep x 4.625 inches tall and weighs 11 pounds. Note that those dimensions describe the connector tray only — the assembled tete-a-tete unit (connector + 2 Adirondack Balcony Chairs) is much larger and heavier, since the chairs themselves provide the structural support for the connector.

  • No. The Tete-a-Tete's pre-drilled mounting holes are designed specifically to align with the LuxCraft Adirondack Balcony Chair (counter-height variant). It will not fit standard-height Adirondack chairs, Classic chairs, Urban chairs, Island chairs, or any other LuxCraft seating series — the hole patterns do not match. For visual coordination, the Tete-a-Tete 3-Piece Set ships with the matching chairs included.

  • Yes. The LuxCraft Balcony Tete-a-Tete includes a center umbrella hole sized for a standard market umbrella shaft. The hole's central position between the two chairs means a single umbrella shades both seats — a practical advantage of the tete-a-tete configuration over two separate chairs that would each need their own shade solution.

Questions & Answers

Have a Question?

Be the first to ask a question about this.

Ask a Question